Paint Bucket Mould

In the market, we can find that many paint buckets use different materials. Commonly used plastic materials include polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC). Aoxu Mould considers that paint buckets are usually used to store various coatings, so the selection of materials needs to take into account various factors such as sealing, corrosion resistance, high temperature resistance, and resistance to deformation.
We recommend using polyethylene for paint bucket products
Among them, polyethylene is a widely used material with good transparency, sealing, and impact resistance, and can also withstand a certain temperature of heat. Polypropylene is also a commonly used material with strong thermal stability and corrosion resistance, as well as good toughness and wear resistance. Polyvinyl chloride material has strong chemical corrosion resistance and will not be corroded by coatings. However, due to its high cost and relatively narrow range of use, it is generally not used for ordinary paint buckets.
Therefore, for manufacturers of paint buckets, it is important to choose the appropriate plastic material. The correct choice will make the paint bucket safer and more reliable during use, while also meeting people's requirements for green environmental protection.

Eccentricity of paint bucket mould refers to the phenomenon where various parts inside the mould are not on the same axis, resulting in displacement. This phenomenon will cause the paint buckets produced by the mold to have uneven shapes, affecting the quality of the paint buckets. The problem of eccentricity in paint bucket moulds may affect production efficiency, but it is not unsolvable. Here are some solutions:
1. Adjust the mould installation machine to ensure its stability and balance, and avoid factors that may cause eccentricity.
2. Optimize mould design to minimize the possibility of eccentricity. For example, adding fixing devices to make the mould more tightly fixed to the machine.
3. For paint bucket moulds that are already eccentric, repair or replacement can be considered. When repairing, professional tools and techniques should be used to carefully analyze the problem and accurately identify the location and cause of eccentricity.
4. When using paint bucket moulds, regular maintenance is required to maintain their good condition. And, it is necessary to check before use to ensure that the paint bucket mould is not deformed or damaged.
In short, eccentricity of paint bucket moulds is a common problem, but it cannot be solved. Through the above methods, we can avoid or solve this problem, ensure smooth production, and improve production efficiency.

Aoxu Mould can provide product analysis and Mouldflow reports, will feedback to customers about the issue arising on the product drawing, such as the Thin thickness area, shrinkage mark, welting mark, Air vent, undercuts, gate location, gate type, etc. After the design is finished, we'll check on the Mould strength, part line, cooling system, interference area, Thin thickness area, etc. To be sure the drawing provided by Aoxu mould is in excellent status for the longer mould life and work efficiency for customers.

1. Plastic bucket design
2. 3D Sample Confirmation
3. Bucket mould design
4. Production of bucket shaped injection moulds
5. Mould trial production
6. Injection bucket manufacturing (if required)

Mould Steel

Hot Runner System

Standard Parts

1. High quality steel with high hardness
2. Good accessories and high brightness
3. Good processing quality and high precision
4. Timely reply via email, phone or fax
5. Provide timely quotations and mold design
6. Timely communication of technical points
7. Timely send pictures of mold processing progress and mold precision machining plan
8. Real time mold testing and sample delivery
9. Timely delivery of molds
A. Pre sales service:
Our company provides excellent sales personnel for professional and timely communication.
B. In sales service:
We have a strong team of designers who will support our clients' research and development. If the customer sends us samples, we can create product drawings and make modifications according to the customer's requirements, and then send them to the customer for approval. We will also provide technical advice to our clients based on our experience and knowledge.
C. After-sale service:
If our product has quality problems during the warranty period, we will replace the damaged parts for you free of charge;also if you have any issue in using our moulds, we provide you professional communication.